Why PEEK polymer is ideal material for medical device?
PEEK(poly ether ether ketone) is confirmed biocompatibility material three decades ago.By the late 1990s, medical grade PEEK polymer had emerged as the leading high-performance thermoplastic candidate for replacing metal implant components, especially in orthopedics and trauma devices.Unfilled PEEK biomaterials can exhibit an elastic modulus ranging between 3 and 4 GPa, the modulus can be tailored to closely match cortical bone (18 GPa) or titanium alloy (110 GPa) by preparing carbon fiber-reinforced (CFR) composites with varying fiber length and orientation.Medical PEEK is increasingly used as biomaterials for the medical products.
Plus, for medical device parts,PEEK provides a great benefit: It saves weight,allows more design freedom and a greater functional integration, it also scores with X-ray transparency and elasticity which corresponds approximately to bone.
✱100% virgin peek ✱Higher tenacity than other kind of PEEK ✱High purity ✱High temperature resistance ✱Excellent dielectric strength
PEEK5600CF30
✱30% carbon fiber filled PEEK ✱Better mechanical performance than other kind of PEEK ✱Tensile strength up to 210 MPa ✱Better wearing resistance ✱5.3 Times thermal conductivity than unfilled PEEK
✱30% glass fiber filled PEEK ✱Better performance on rigidness,anti-creep ,more stable dimension ✱Compressive strength up to215MPa ✱Lzod impact strength up to 51kJ/m² ✱Bearing fixed load for a long time at high temperature
PEEK(Poly ether ether ketone) is the most well known and important member of the PAEK(Poly aryl ether ketone) group. This high-performance polymer material combines high-termperature resistance,good wear, and excellent mechanical properties. For instance, the glass transition temperature of PEEK is around 143 °C (289 °F) ,and melts around 343 °C (662 °F). The carbon fiber filled PEEK or glass fiber PEEK material have a useful operating temperature of up to 250 °C (482 °F).
PEEK material is the best comprehensive performance of special engineering plastics. PEEK shows excellent overall performance due to its large amount of benezene ring structure in its molecule. At present, medical grade PEEK material made by Junhua PEEK is widely used in high-end medical device.
● High chemical resistance ● Biocompatibility ensures the human body accepts the part, and the part doesn’t break down over time ● Strength and stiffness similar to that of bone in its flexibility, much more so than steel or titanium ● Remarkably inert with no response to most solvents, lipids, blood or enzymes in the body ● Stable at high temperatures ● Can replace metals like stainless steel or titanium ● Can be sterilized via E-beam, steam, gamma, etc. ● Inherently good wear and abrasion resistance ● Naturally translucent when viewed using X-ray, CT, or MRI.
What Kinds of Medical Grade PEEK Material You Have?
I. Unfilled PEEK
PEEK5600G is one of unfilled or natural PEEK.It is a high performance, high temperature, semi crystalline thermoplastic material manufactured by JUNHUA PEEK. Outstanding chemical resistance and a high operating temperature (up to 250℃/480F) round out PEEK profile.PEEK plastic has excellent dimensional stability combined with high creep stability, ensuring the suitability of PEEK for the most sophisticated machined parts. Besides, the unfilled black PEEK or black PEEK is also available.
II. 30% Carbon fiber filled PEEK
PEEK5600CF30 is a 30% carbon filled PEEK material that is manufactured by JUNHUA PEEK. Its carbon fiber reinforcement supports the material a high level of rigidity. Carbon fiber reinforced PEEK demonstrates very high mechanical strength values.However,30% carbon fiber reinforced PEEK(PEEK5600CF30,1.4±0.02g/cm3)presents lower density than 30% glass fiber filled peek(PEEK5600GF30,1.5±0.02g/cm3).Besides,carbon fiber composites tend to be less abrasive than glass fibers while simultaneously resulting in improved wear and friction properties. The addition of carbon fibers also ensures a significantly higher level of heat conductivity which is also beneficial for increasing part life in sliding applications. Carbon filled PEEK has also an excellent resistance to hydrolysis in boiling water and super heated steam.
III. CF/PEEK
CF/PEEK is obtained by thick gauge thermoforming of thin layers of previously impregnated fibres to form fully consolidated sheets, whose main difference to custom-made composite plates lies in the standardized orientation of the reinforcing fibres, standardized weight content of the polymer and standardized sheet thicknesses, thus allowing easy design and post-processing using identical or similar tools as commonly used when working with metallic light-weight materials like aluminium, titanium and steel.
IV. Customized PEEK
The customized size or shape or color of PEEK products is made by Junhua PEEK as your product designing requirement.
We will be in a very short period of time to give you a satisfactory reply.
Changzhou Junhua Medical Technology Co., LTD.found in 2019, is a wholly-owned subsidiary of Junhua ChinaPEEK.Relying on 16 years of R& D and production experience of the parent company in PEEK, PPSU and other polymer materials,Junhua medical dedicates on PEEK, PPSU and other medical polymer materials in the medical industry application solutions.
The first China maker of 2-meter-long PEEK sheet by mould compression process
2012
The first enterprise standard for PEEK rod,PEEK sheet, PEEK tube in China.
2013
The first company to R&D the continuous extruded PEEK round bar,PEEK plate, PEEK hollow bar.
2014
High-tech product certification of Jiangsu Province as the leading PEEK manufacturer.
2015
National high-tech enterprise certification as the premier PEEK factory of PEEK rod,PEEK sheet and PEEK tubing.
2016
PEEK cable extrusion
2017
2 Tons of PEEK plate and PEEK bar, PEEK profiles exported to Germany.
2018
2,500-ton PEEK polymer material factory in Jining, Shandong.
2018
The first China manufacturer of CF/PEEK thermoplastic composite, which is used in the aerospace industry and medical industry mainly.
2019
A wholly-owned subsidiary, Changzhou Junhua Medical Technology Co., Ltd,which focus on medical grade PEEK rod,sheet,tubing and biocompacibility PPSU rod,sheet,and other medical device related PEEK products.
2019
GMP standard 100,000-grade clean room for PEEK capillary and PEEK medical products.
2020
Potential Qualified Supplier of COMAC(Commercial Aircraft Corporation of China, Ltd.), high-quality.
2021
National standards for polyetheretherketone (PEEK) 2022 IPO plan.
PEEK and PPSU is used in many different areas of the medical industry, from implantable devices that have to be both strong and biocompatible to reusable medical instruments that have to be sterilized repeatedly using harsh processes such as autoclaving. PEEK and PPSU is an good choice for medical applications for numerous reasons, including its excellent fatigue/wear properties, high strength-to-weight ratio, and biocompatibility.
PEEK Medical Tubing
Polyether Ether-Ketone (PEEK) is an engineering grade thermoplastic polymer with characteristics that are uniquely suited to many medical tubing applications. PEEK is a high purity, semi-crystalline, organic polymer with excellent resistance to thermal degradation at high temperatures. PEEK tubing exhibits high column strength, as well as high tensile strength and high flexural modulus, making it perfect for catheters and other tubing applications requiring good torque response and pushability.
Extruded PEEK tubing is used in medical applications where exceptionally high rigidity is needed. Due to PEEK’s excellent biocompatibility, it is a suitable choice for long-term implants. With a modulus similar to bone, PEEK is commonly used in orthopedic implant applications. PEEK tubing can also be found in medical applications requiring high vacuum or pressure holding capability. The material can serve as an effective alternative to steel, aluminum, glass, and other polymers, including use as a composite structure in reinforced catheter shafts.
Medical PEEK for Trauma Device
30% Carbon Filled PEEK has been reinforced with carbon fibers that improve PEEK’s compressive strength and stiffness, while also reducing its expansion rate. This grade of PEEK offers the best wear resistance and load bearing capabilities, while also offering 3.5 times higher thermal conductivity than Unfilled PEEK. This improves bearing life and capability. 30% Carbon Filled PEEK ( PEEK5600CF30) is available in sheet and rod in a black color. PEEK5600CF30 is also can be made the injection Trauma PEEK Targeting Device.
Medical PEEK for Sport Medicine
As the fifth category of orthopedics in China, sports medicine has been widely used in orthopedics with its two core characteristics of minimally invasive surgery and reduction of soft tissue damage.The market share of the global orthopaedic industry is as high as over 1%, with a rapid growth rate of 30% every year, which is the fastest growing segment of the orthopaedic industry in the future.At present, more than 90% of the market share of sports medicine is occupied by foreign medical giants. At present, medical transport in China is still in the early stage of development.However, with the development of domestic orthopedic industry, the replacement of import is an inevitable trend.In the next 3-5 years, domestic sports medicine will focus on the development of registration, involving mold opening and injection molding foundry, and the demand for implant-grade particles will also increase rapidly. There are huge demands and opportunities.
Junhua Medical is always at the forefront of the market. Since the middle of 2020 year, Junhua PEEK has started to work with dozens of trauma device manufactures to develop the implantable intramedullary nail. The implantable PEEK material is provided by the medical partner, and Junhua company provide the OEM service.
Implantable PEEK
AKSO PEEK is the registrated brand for implantable PEEK made by Junhua PEEK.The authority license is under the process and it will be gained in the end of 2022 as plan. AKSO is the representative of the goddess of health in ancient Greek mythology. AKSO is the medical grade long-termed implantable PEEK by Junhua medical.Four kinds of implantable PEEK will be available, AKSOPEEK Natural AKSOPEEK HA AKSOPEEK CF AKSOPEEK LCF
