PEEK Modified
PEEK Modified
PEEK Modified
lending modification is usually the most commonly used modification method for PEEK materials. Generally, fibers, metal oxides, inorganic fillers and other high molecular polymers such as PTFE can be added to the raw materials. The PEEK composite material prepared by this method can improve the defects of PEEK by using the composite effect, and improve the comprehensive properties of the material to a great extent.
PEEK
Types of PEEK Modification
UNFILLED PEEK has excellent physical and chemical properties in its own right. Its characteristics of high strength, high toughness, corrosion resistance, high temperature resistance, good insulation, high purity basically meet most of the industrial environment.
Glass Fiber Filled PEEK
The most commonly used glass fiber filled peek content is 30%. The name of this material in Junhua is
PEEK5600GF30. Compared with PEEK unfilled, the PEEK material filled with glass fiber can improve higher
hardness, strength and better heat resistance. The thermal deformation temperature of PEEK filled with
glass fiber can be increased from 160 ℃ to over 300℃. Compared with this, the disadvantages of glass
fiber modification are that it is more difficult to process, and the toughness and electrical properties
are decreased compared with PEEK unfilled.
According to the liquidity, it can be subdivided into:
PEEK3600GF30; PEEK5600GF30; PEEK7600GF30；
Carbon Fiber Filled PEEK
CThe most commonly used carbon fiber filled peek content is 30%. The name of this material in Junhua is
PEEK5600CF30. Compared with PEEK unfilled, the PEEK material filled with carbon fiber can improve higher
hardness, strength, better heat resistance and friction characteristics. The modified peek filled with
carbon fiber can be increased from 160 ℃ to over 300℃. Compared with this, the disadvantages of its
carbon fiber modification are that it is more difficult to process, and the toughness is reduced. At the
same time, due to the addition of carbon fiber, it has conductive characteristics.
According to the liquidity, it can be subdivided into:
PEEK3600CF30; PEEK5600CF30; PEEK7600CF30；
PEEK HPV
PEEK HPV is a peek material with low friction coefficient and good wear resistance. Among them, peek
accounts for 70%, PTFE accounts for 10%, graphite accounts for 10%, and carbon fiber accounts for 10%.
The name of this material in Junhua is PEEK5600LF30. The filling of graphite and PTFE can well reduce
the friction coefficient of the material, and can still reduce the energy consumption and noise in the
use process without using the lubricating medium; The addition of carbon fiber can improve the rigidity
of the material. Compared with other brands, its disadvantage is that its brittleness is large, that is,
its impact strength is small.
According to the liquidity, it can be subdivided into:
PEEK3600LF30; PEEK5600LF30; PEEK7600LF30；
Contact Us
What is PEEK？
PEEK and its modified composite materials show excellent performance under high temperature and high humidity conditions. PEEK have excellent chemical corrosion resistance, self-lubricating, and wear-resistant properties, so it has become the most ideal material to replace copper alloys and ordinary rubber. Compared with them, PEEK has longer service life which can reduce equipment operating costs, improve equipment operating reliability.
High Temperature Performance
PEEK's performance can remain stable in the temperature range from -196°C to 260°C. Under extreme working conditions, it can withstand 300"C for a short time. The performance of PEEK is still reliable even in high temperatures of several kilometers underground work environment.
High Strength and Wear Resistance
Compared with other plastics, PEEK is resistant to compression, impact and also have good fatigue resistance. PEEK is durable in mechanical equipment and wear-resistant environments.
Double the Service Life
PEEK sealing solutions can improve the part service life. Some domestic chemical companies use the PEEK5600FE20 polytetrafluoroethylene modified material designed by JUNHUA PEEK to replace the original material, the service life of the wear parts can even be extended by 1.3-3 times.
Corrosion Resistance
PEEK is chemically inert, and has no reaction to most acids, oils, greases and all other organic and inorganic solvents or enzymes, and can still maintain good strength and dimensional stability.
Self-lubricating
PEEK has low friction coefficient, low running resistance, can be used without oil in some working conditions. The equipment is cleaner, thus improving process reliability, improving energy efficiency and saving costs.
More dom in Design
Injection molds can be used for rapid injection molding of large quantities of complex special-shaped parts, and the cost is low compared to machining.
PEEK Solutions
Common PEEK Grades and Properties
1. PEEK5600G (brown-gray/khaki) is made from pure polyetheretherketone resin and offers the best toughness and impact resistance of all PEEK grades. Pure PEEK can be sterilized using convenient methods (steam, dry heat, ethanol, and gamma-rays), and the raw materials used in its manufacture comply with EU and US FDA food compatibility regulations. These characteristics make it widely used in the medical, pharmaceutical, and food processing industries.
2. PEEK5600LF30 (black) The addition of PTFE, graphite, and carbon fiber makes PEEK5600LF30 a bearing-grade plastic. Its superior tribological properties (low coefficient of friction, wear resistance, and high peak pressure limit) make it an ideal material for this class of friction applications.
3. PEEK5600GF30 (Brown-Gray): This material is a reinforced grade of plastic filled with 30% glass fiber. It offers superior rigidity, creep resistance, and dimensional stability compared to PEEK, making it ideal for structural parts. It can withstand fixed loads for extended periods at high temperatures. If PEEK5600GF30 is used as a sliding component, its suitability should be carefully verified, as the glass fiber can scratch mating surfaces.
4. PEEK5600CF30 (Black): This material is reinforced with 30% carbon fiber. It offers superior mechanical properties (higher elastic modulus, mechanical strength, and creep resistance) and wear resistance compared to PEEK5600GF30. Furthermore, carbon fiber-reinforced plastic has 3.5 times the thermal conductivity of unreinforced PEEK, dissipating heat more quickly from the bearing surface.
Mechanical Properties
| Item | Test Standard or Instrument |
Unit | PEEK5600G 100% PEEK |
PEEK5600GF30 PEEK+30% glass fiber |
PEEK5600CF30 PEEK+30% carbon fiber |
PEEK5600LF30 PEEK+30% (carbon fiber +graphite+PTFE) |
PEEK5600FE20 PEEK+20%PTFE |
|---|---|---|---|---|---|---|---|
| Tensile Strength (23℃) | ISO 527 | MPa | 95 | 175 | 250 | 145 | 70 |
| Tensile Modulus (23℃) | ISO 527 | GPa | 3.8 | 11 | 23 | 12.5 | / |
| Elongation at Break (23℃) | ISO 527 | % | 35 | 2.0 | 1.5 | 2.2 | / |
| Flexural Strength (23℃) | ISO 178 | MPa | 155 | 235 | 350 | 220 | 118 |
| Flexural Modulus (23℃) | ISO 178 | GPa | 3.5 | 10 | 21 | 11 | / |
| Charpy Impact Strength (unnotched) | ISO 179/1U | kJ/m2 | No break | 55 | 45 | 32 | No break |
| Cantilever Beam Impact Strength (notched) | ISO 180/A | kJ/m2 | 4 | 6 | 6.5 | 4 | 6 |
Thermal Properties
| Item | Test Standard or Instrument |
Unit | PEEK5600G 100% PEEK |
PEEK5600GF30 PEEK+30% glass fiber |
PEEK5600CF30 PEEK+30% carbon fiber |
PEEK5600LF30 PEEK+30% (carbon fiber +graphite+PTFE) |
PEEK5600FE20 PEEK+20%PTFE |
|---|---|---|---|---|---|---|---|
| Melting Point | ISO11357 | ℃ | 343 | 343 | 343 | 343 | 343 |
| Glass Transition Temperature | ISO11357 | ℃ | 143 | 143 | 143 | 143 | 150 |
| Heat Deflection Temperature | ISO 75A/B | 1.8MPa. ℃ | 152 | 315 | 315 | 293 | 150 |
| Thermal Expansion Coefficient | ASTM D696 | ppm K-1 | 45 | 22 | 15 | 22 | 70 |
| Thermal Conductivity | ISO /CD22007-4 | W/(m·K) | 0.29 | 0.32 | 0.95 | 0.86 | / |
Electrical Properties
| Item | Test Standard or Instrument |
Unit | PEEK5600G 100% PEEK |
PEEK5600GF30 PEEK+30% glass fiber |
PEEK5600CF30 PEEK+30% carbon fiber |
PEEK5600LF30 PEEK+30% (carbon fiber +graphite+PTFE) |
PEEK5600FE20 PEEK+20%PTFE |
|---|---|---|---|---|---|---|---|
| Dielectric Strength (2mm) | IEC 60243-1 | kV/mm | 20 | 19 | / | / | 19 |
| Dielectric Constant | IEC 62631 | - | 3.0 | 3.3 | / | / | 2.7 |
| Surface Resistivity | GB/T31838.3 | Ω | 1015 | 1014 | / | / | 1015 |
| Volume Resistivity | IEC 62631 | Ω·cm | 1015 | 1015 | 105 | 106 | / |
Other Properties
| Item | Test Standard or Instrument |
Unit | PEEK5600G 100% PEEK |
PEEK5600GF30 PEEK+30% glass fiber |
PEEK5600CF30 PEEK+30% carbon fiber |
PEEK5600LF30 PEEK+carbon fiber +graphite+PTFE |
PEEK5600FE20 PEEK+20%PTFE |
|---|---|---|---|---|---|---|---|
| Color | / | / | Natural | Natural | Black | Black | Natural |
| Melt Flow Index (400℃, 2.16kg) | ISO 1133 | g/10min | 6-10 | 2-5 | 1-3 | 2-5 | / |
| Density | ISO 1183 | g/cm3 | 1.30±0.02 | 1.50±0.02 | 1.40±0.02 | 1.44±0.02 | 1.41±0.02 |
| Water Absorption (23℃, 24Hrs) | ISO 62-1 | % | 0.07 | 0.05 | 0.04 | 0.05 | 0.15 |
| Rockwell Hardness | / | HRR | 118 | 119 | 121 | 108 | 113 |
| Flammability Rating | UL 94 | / | V-0 | V-0 | V-0 | V-0 | / |
| Coefficient of Friction | ASTM D3702 | 100N-120rpm | 0.30-0.38 | 0.38-0.46 | 0.15-0.25 | 0.18-0.30 | 0.1-0.2 |
*This data is for reference and not a guarantee. For a more detailed data sheet, please contact our company's technical department.
Contact Us
Junhua Competitiveness
Choosing JunHua means choosing a partner with a complete industrial chain, strong technology research and development capabilities, an efficient production system, strict quality assurance, and excellent customer support.
Industry Deep Dive
18 years of experience in high-performance engineering plastics, serving high-barrier industries such as aerospace and medical, trusted globally.
Complete Industry Chain
From aggregation to processing, a one-stop PEEK solution, simplifying purchases and reducing risks.
Technology Research and Development
12 items of invention patents, 27 items of utility model patents, with collaboration with universities, continuous innovation.
Production Capability
40+ high-efficiency extrusion lines, 500+ professional teams, quick response to global demands.
Quality Assurance
Strict quality control, product traceability from aggregation to processing, three-dimensional detection, COA quality report.
Customer Support
Material selection, mold design, custom processing, and complete after-sales support, becoming your strategic partner.
Service
JunHua HPP offers one-stop PEEK solutions from design to after-sales, ensuring quality, innovation, and customer satisfaction.
Design and processing
Junhua offers injection molding, machining, and extrusion solutions to optimize design and cost.
Material selection
Junhua specializes in PEEK with multiple grades and recommends the best engineering plastics for your needs.
Measurement
Junhua uses high-precision instruments to provide customers with accurate drawings.
Sampling
Junhua supplies samples for testing and refines designs until approval for mass production.
Mass Production
Junhua controls raw materials, processes, and inspections to ensure consistent product quality.
Quality Control
Junhua follows ISO9001 standards and provides full inspection reports as required.
Improve
Junhua continuously optimizes designs and processes through improvement systems and case experience.
After-sales Service
Junhua offers complete after-sales support to resolve technical issues and protect customer interests.
Certificate
About Us
Junhua was founded in 2007 and specializes in the development, production, and sale of high-performance engineering plastics, particularly PEEK, PI, PPSU, and other special polymers. The company has a modern factory occupying 15,000+ square meters , with 40+ extrusion lines ,Complete injection molding and CNC processing equipment, with an annual production capacity of over.
We have obtained multiple international certifications such as AS9100D (Aerospace), ISO9001, IATF1649 (Automotive), ISO13485 (Medical Devices), FDA, RoHS, REACH, SGS , and our products are fully traceable . Our customers cover multiple high-threshold industries in over 60 countries and regions , including aerospace, medical, semiconductor, electronics, food, and new energy vehicles. We are committed to becoming a global leader in PEEK solutions.
12 Patents for Invention
27 Utility Model Patents
15,000+㎡ Factory
40+ Extrusion Lines + Cleanroom
60+ Countries
30000+ Global Customers | 3 Billion+ Sales
500+ Team Members
18+ Years of Experience | 40+ Global Employees
Multiple International Certifications
AS9100D / ISO13485 / IATF16949 etc.
1000+ Global Partners
Serve 60+ Countries